Exchange bias induced by the fully strained La2/3Ca1/3MnO3 dead layers

published_or_final_versio

Magnetoresistance in La- and Ca-doped YBa2Cu3O7–δ

We studied the microstructures, electronic, and magnetic properties on La-doped and La- and Ca-codoped YBa2Cu3O7−δ (YBCO). The superconducting transition temperature remains unchanged up to 10% for La-doped YBCO. The competition between electrons and holons was assumed according to the variation of Tc0 in La and Ca codopings in YBCO. The magnetoresistance (MR) effect is about 8%, which is observed obviously near the critical temperature and is independent of the content of La in La-doped YBCO. MR increases up to about 40% with the incorporation of Ca in La-doped YBCO. We present here possible explanations for the magnetoresistance effect in polycrystalline samples based on the microstructure and the increase of oxygen vacancies at grain-boundary interface. © 2006 American Institute of Physicspublished_or_final_versio

Magnetically tunable properties related with carriers density in self-doped La1−xMnO3/y wt %Nb-SrTiO3 heteroepitaxial junctions

The self-doped La1−xMnO3 (x=0.1 and 0.3) thin films deposited on Nb-doped (wt % y) SrTiO3 (y=0.05 and 0.8) crystals to form heteroepitaxial junctions have been prepared by the pulse laser deposition method. The current-voltage loops of junction were measured at several fixed magnetic fields for the temperature from 10 to 300 K. We have focused on the effects of doping level and annealing time on the magnetically tunable property of the junction. The results show that these junctions have a typical temperature-dependent rectifying characteristics and asymmetrical hysteresis. The magnetically tunable property of the junction was related with the annealing time for the self-doped La1−xMnO3−δ thin film and the doping level in the Nb-doped SrTiO3 (STON) crystal. In the self-doped La0.9MnO3/0.05-STON junction annealed at 900 °C for 5 h, the relative ratio of voltage [Vb(0)−Vb(H)] /Vb(0) is about 70% at H=6 T and T=70 K for I=0.1 mA, showing a large magnetically tunable property. These results reveal the great potential of the manganites in configuring artificial devices.published_or_final_versio

iPose: Instance-Aware 6D Pose Estimation of Partly Occluded Objects

We address the task of 6D pose estimation of known rigid objects from single input images in scenarios where the objects are partly occluded. Recent RGB-D-based methods are robust to moderate degrees of occlusion. For RGB inputs, no previous method works well for partly occluded objects. Our main contribution is to present the first deep learning-based system that estimates accurate poses for partly occluded objects from RGB-D and RGB input. We achieve this with a new instance-aware pipeline that decomposes 6D object pose estimation into a sequence of simpler steps, where each step removes specific aspects of the problem. The first step localizes all known objects in the image using an instance segmentation network, and hence eliminates surrounding clutter and occluders. The second step densely maps pixels to 3D object surface positions, so called object coordinates, using an encoder-decoder network, and hence eliminates object appearance. The third, and final, step predicts the 6D pose using geometric optimization. We demonstrate that we significantly outperform the state-of-the-art for pose estimation of partly occluded objects for both RGB and RGB-D input

Nanoscale ferroelectric tunnel junctions based on ultrathin BaTiO₃film and Ag nanoelectrodes

Author name used in this publication: J. Y. Dai2012-2013 > Academic research: refereed > Publication in refereed journalVersion of RecordPublishe

Accurate and linear time pose estimation from points and lines

The final publication is available at link.springer.comThe Perspective-n-Point (PnP) problem seeks to estimate the pose of a calibrated camera from n 3Dto-2D point correspondences. There are situations, though, where PnP solutions are prone to fail because feature point correspondences cannot be reliably estimated (e.g. scenes with repetitive patterns or with low texture). In such scenarios, one can still exploit alternative geometric entities, such as lines, yielding the so-called Perspective-n-Line (PnL) algorithms. Unfortunately, existing PnL solutions are not as accurate and efficient as their point-based counterparts. In this paper we propose a novel approach to introduce 3D-to-2D line correspondences into a PnP formulation, allowing to simultaneously process points and lines. For this purpose we introduce an algebraic line error that can be formulated as linear constraints on the line endpoints, even when these are not directly observable. These constraints can then be naturally integrated within the linear formulations of two state-of-the-art point-based algorithms, the OPnP and the EPnP, allowing them to indistinctly handle points, lines, or a combination of them. Exhaustive experiments show that the proposed formulation brings remarkable boost in performance compared to only point or only line based solutions, with a negligible computational overhead compared to the original OPnP and EPnP.Peer ReviewedPostprint (author's final draft

Ordered arrays of multiferroic epitaxial nanostructures

Epitaxial heterostructures combining ferroelectric (FE) and ferromagnetic (FiM) oxides are a possible route to explore coupling mechanisms between the two independent order parameters, polarization and magnetization of the component phases. We report on the fabrication and properties of arrays of hybrid epitaxial nanostructures of FiM NiFe2O4 (NFO) and FE PbZr0.52Ti0.48O3 or PbZr0.2Ti0.8O3, with large range order and lateral dimensions from 200 nm to 1 micron

Phase-change control of ferromagnetism in GeTe-based phase change magnetic thin-films by pulsed laser deposition

Author name used in this publication: G. Y. Gao2011-2012 > Academic research: refereed > Publication in refereed journalVersion of RecordPublishe

Microstructures and resistivity of cuprate/manganite bilayer deposited on SrTiO3 substrate

Thin Yba[SUB2]Cu[SUB3]O[SUB7-δ/La[SUB0.67]Ca[SUB0.33]MnO[SUB3] (YBCO/LCMO) films were grown on SrTiO[SUB3](STO)substrates by magnetron sputtering technique. The microstructures of the bilayers were characterized and a standard four-probe technique was applied to measure the resistivity of the samples. The interdiffusions at the YBCO/LCMO and LCMO/STO interfaces formed two transient layers with the thickness of about 3 and 2 nm, respectively. All the bilayers were well textured along the c axis. At low temperature, the superconductivity can only be observed when the thickness of YBCO is more than 25 nm. When the thickness of YBCO is less than 8 nm, the bilayers show only ferromagnetism. The superconductivity and ferromagnetism perhaps coexist in the bilayer with the YBCO thickness of 12.5 nm. These interesting properties are related to the interaction between spin polarized electrons in the manganites and the cooper pairs in the cuprates. © 2003 American Institute of Physics.published_or_final_versio